Adjusting The Position Horizontally And Vertically; Returning To The Default Video Wall Setup; Assigning The Projected Image On The Video Wall Setup - Sharp XG-P560W Setup Manual

Adjusting the Position
Horizontally and Vertically
Click "UP", "DOWN", "LEFT" or "RIGHT" to the po-
sition of the projected image.

Assigning the Projected Image on the Video Wall Setup

Followings are examples for assigning the projected images for the front and rear projections.
Front Projection
1
2
4
5
7
8
The numbers of the projector refer to the numbers
of the projected positions.
1 2 3
4 5 6
7 8 9
3
6
9
Returning to the Default
Video Wall Setup
1
Select "1 X 1" on "Division".
2
Click the assigning button 1.
• The video wall setup will return to the de-
fault settings.
Rear Projection
The numbers of the projector refer to the numbers
of the projected positions.
1 2 2 2
4 5 5 5
7 8
Video Wall Projection
2
1
5
4
7 8
3 3
6
9
3
6
9
-47