Fit To Screen Function; I/P Conversion (Video Mode Only) - Sharp XG-NV51XE Operation Manual

Fit to Screen Function

Projector
2, 3, 4
(GUI) On-screen Display
I/P Conversion
Projector
2, 3, 4
(GUI) On-screen Display
31
ON VOL
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
1, 5
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
(VIDEO mode only)
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
1, 6
R-CLICK ENTER
5
INPUT IrCOM
FREEZE AUTO SYNC
This function can be used to expand or compress
images which are not native 4:3
1,024 resolution).
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "Fit To Screen".
4 Press ß/© to select " " to display the image in
its native resolution or " " to expand the image,
to fill the screen.
5 To exit from the GUI, press MENU.
This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smooth video image.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "I/P Conversion", and then
press ©.
4 Press ∂/ƒ to select "Interlaced" or "Progressive".
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
MOUSE ADJ.
aspect ratio (i.e. 1,280
MOUSE ADJ.