Table of Contents
Advertisement
Computer Image Adjustments
Projector
2, 3, 4
AUTO SYNC
(GUI) On-screen Display
On-screen Display
(GUI) On-screen Display
27
VOL
ON
MUTE
OFF
BLACK
SCREEN
LASER
TOOLS
MENU
1, 5
R-CLICK
ENTER
INPUT
IrCOM
FREEZE
AUTO SYNC
KEYSTONE ENLARGE
button
g
f
s
Auto Sync
Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC on the projector or the "Power"
remote control, or automatically by setting "Auto Sync"
to "ON" in the projector's GUI menu.
When "Auto Sync" is set to "ON":
• The
sync
adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
• The Auto Sync adjustment setting previously made is
cleared when the projector's setting is changed.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Auto Sync".
4 Press ß/© to select "ON".
5 To exit from the GUI, press MENU.
• Automatic adjustments can be made by pressing AUTO
SYNC on the projector or the "Power" remote control.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See the
previous page.)
During Auto Sync adjustment, the On-screen Display
changes as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
Auto Sync Display Function
Normally, an image is not superimposed during Auto
Sync adjustment. You can, however, choose to
superimpose a Sharp image during Auto Sync
adjustment.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select "Options".
3 Press ∂/ƒ to select "Auto Sync Disp".
4 Press ß /© to select " " to superimpose a Sharp
image or " " to remove the Sharp image during
Auto Sync adjustment.
5 To exit from the GUI, press MENU.
MOUSE
ADJ.
Advertisement
Table of Contents
