Table of Contents
Advertisement
Setting up the Projector Network Environment ("Network" menu)
(Continued)
2 DHCP Client Setting
2
2
2
2
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Selectable items
On
Off
Select "On" for "DHCP Client", then press
hENTER. "Obtaining IP Address..." appears,
then the menu screen appears. Confirm the pa-
rameters of IP Address, Subnet Mask and Gate-
way on the TCP/IP screen.
If the DHCP server is not available, "Could not
obtain IP Address." appears.
In this case, set the TCP/IP manually. (See the
item 3.)
3 TCP/IP Setting
3
3
3
3
Set the TCP/IP manually.
1
Select "Off" for "DHCP Client",
then press hENTER.
2
Select "TCP/IP", then press
hENTER.
3
Enter "IP Address" using P, R, Q
and O, then press hENTER.
Setting the TCP/IP
IP Address
Subnet Mask
Gateway
4
Enter "Subnet Mask" using P, R,
Q and O, then press hENTER.
5
Enter "Gateway" using P, R, Q and
O, then press hENTER.
50
Description
Obtains configuration
parameters for TCP/IP network
automatically.
Sets the TCP/IP manually.
Network
1
9 2 .
1
6 8 .
1
5 0 .
0
0 2
2
5 5 .
2
5 5 .
2
5 5 .
0
0 0
0 0 0 .
0 0 0 .
0 0 0 .
0 0 0
Menu operation n Page
Selectable items
IP Address
Factory default setting:
192.168.150.002
Enter an IP address appropri-
ate for the network.
Subnet Mask
Factory default setting:
255.255.255.000
Set the subnet mask to the
same as that of the computer
and equipment on the
network.
Gateway
Factory default setting: 000.
000. 000. 000
* When not in use, set to "000.
000. 000. 000".
Note
• Confirm the existing network's segment (IP
address group) to avoid setting an IP address
that duplicates the IP addresses of other net-
work
equipment
"192.168.150.002" is not used in a network
with an IP address of "192.168.150.XXX", you
don't have to change the projector IP address.
• For details about each setting, consult your
network administrator.
4 Confirming the
4
4
4
4
Projector Information
You can confirm the MAC address and projector
name.
Displayed items
MAC Address
The MAC address of the
projector is displayed.
Projector
The projector name is
displayed. (Factory preset :
XG-MB67X)
Note
• For information on how to change the projec-
tor name, see "SETUP MANUAL" contained
in the supplied CD-ROM.
Description
or
computers.
If
Description
40
Advertisement
Table of Contents
Troubleshooting
