Table of Contents
Advertisement
2 Adjusting the Image
2
2
2
2
Adjustment
O button
Items
Contrast
For less
contrast.
Bright
For less
brightness.
1
Red*
For weaker red.
Blue*
1
For weaker
blue.
2
Color*
For less color
intensity.
2
3
Tint*
*
For making skin
tones purplish.
Sharp*
2
For less
sharpness.
1
Bright Boost*
For high fidelity
color reproduc-
tion.
*1 Not adjustable/selectable when selecting
"sRGB".
*2 Not displayed in the RGB input mode.
*3 "Tone" will appear on the menu screen only when
PAL or SECAM signals are input (including when
forcibly changed to those input signals). There is
basically no need to adjust "Tone", but you can
adjust the picture tone with this adjustment when
inputting PAL or SECAM signals .
Note
• "Bright Boost" and "CLR Temp" cannot be set
when "sRGB" is selected.
• To reset all adjustment items, select "Reset"
and press hENTER.
3 Adjusting the Color
3
3
3
3
Temperature
Selectable
items
5500K
For lower color temperature for
6500K
warmer, reddish incandescent-like
7500K
images.
8500K
9300K
10500K
For higher color temperature for
cooler, bluish, fluorescent-like images.
Note
• Values on "CLR Temp" are only for general
standard purposes.
Q button
For more
contrast.
For more
brightness.
For stronger red.
For stronger
blue.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.
For more
vividness.
Description
P
R
Menu operation n Page
4 Progressive
4
4
4
4
Selectable
items
2D
Useful to display fast-moving images
Progressive
such as sports.
Useful to display relatively slow-
3D
Progressive
moving images such as drama and
documentary more clearly.
Reproduces the image of film source*
Film Mode
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Note
• In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be se-
lected.
5 Lamp Setting
5
5
5
5
Select-
Bright-
Fan
able
ness
sound
items
Eco +
Approx.
Low
Quiet
80%
100%
Normal
Bright
Note
• When "Lamp Setting" is set to "Eco+Quiet",
the power consumption will decrease and the
lamp life will extend. (Projection brightness
decreases approximately 20%.)
40
Description
Power
consumption
Lamp Life
(When using
AC 110V)
308W
Approx.
3,000
hours
385W
Approx.
2,000
hours
43
Advertisement
Table of Contents
Troubleshooting
