Model 3720Se Osd (On-Screen Display) Menu; Model 3720Se Terminal Front Panel - Wyse Winterm 3000 Series User Manual

Integrated Terminal Monitor Adjustments
Instructions for using the terminal's front panel are listed in the following table.
Table 4-2 Model 3720SE Terminal Front Panel
Button
MENU (OSD)
SELECT (Brightness)
ADJUST (Contrast)
Figure 4-3 Model 3720SE OSD (On-Screen Display) Menu
H-CENTER
H-SIZE
V-CENTER
V-SIZE
PIN
+
Table 4-3 (following) describes the functions of the OSD menu.
Function
To use:
Press the MENU button to invoke the OSD (refer to the
following figure).
Press the plus [+] or minus [-] SELECT buttons to select the
adjustment you want to make (see Table 4-3 for settings).
Press the ADJUST plus [+] or minus [-] buttons to make your
adjustment.
Press MENU to save your adjustments and close the OSD.
Note
The OSD can be invoked at any time the
terminal is on, even while running an application.
It automatically closes after a period of inactivity
(2 minutes). If this happens before you complete
your adjustments, press the MENU button to
invoke the OSD again.
Press the plus [+] and minus [-] buttons on the terminal's front
panel to increase or decrease the display's brightness.
Press the plus [+] and minus [-] buttons on the terminal's front
panel to increase or decrease the display's contrast.
TRAPEZOID
ROTATE
RECALL MODE
+
33