Energy Savers - Wyse Winterm 3000 Series User Manual

Display Configuration

Energy Savers

This paragraph discusses energy saving features, referring to Figure 3-1 and using
Table 3-2.
Table 3-2 Energy Savers
Display Properties Sheet
Area Called...
Enable Energy Savers
To Use...
Click on this check box to activate the energy saver
functions. When you check this box, all three
functions in the group box are activated:
Screen Saver
Click on this radio button to enable the screen saver.
By default this function is not activated.
Turn Off Monitor
Click on this radio button to use this function as an
energy saver. The function works by shutting off the
terminal's display rather than displaying a screen
saver. By default this function is not activated. When
Enable Energy Savers is activated, this function is
enabled.
Wait
Adjust the amount of time (in minutes) that elapses
before the energy saver function you have selected
starts. You can enter a number or use the scrolling
list. By default the function is not activated. When it is
activated, the default is 12.
29