Ending A Connection - Wyse Winterm 3000 Series User Manual

44
Chapter 6
Table 6-1 identifies and describes each of functions of the properties sheet.
Table 6-1 Connections Properties Sheet
Function
Connection Name
Type
Status
Connect
End
Shutdown

Ending a Connection

Click on the End command button to end the connection process. When you press the
End button and the connection is active, the End Task dialog displays. The End
command button is enabled when one or more sessions become active.
Description
This application window lists the connections that you can
use. Default RDP Connection and Default ICA Connection
are the default connections for the window.
Note
See the administrators guide for information
about creating connections.
This list shows the type of connection. The defaults are RDP
and ICA.
This list shows the status of the connection. If a connection is
live, the status for that connection will be Active. If a
connection is not live, the list will show a blank.
Click on a connection in the Connection Name list box to
highlight it. Click on the Connect command button to make
the highlighted connection. You can also double-click on a
selection to make a connection.
See Ending a Connection.
See Shutting Down the Terminal.