Page 1
User Manual WINIX AIR CLEANER ZERO+ (AUS-1250AZPU) Model ˍ Please read and follow all safety rules and instructions Use & Care in this manual before operating. Guide ˍ The product warranty is printed on the back of this guide, so please keep it in a safe place for future use.
CONTENTS 5-STAGE AIR PURIFICATION · · ············································ 3 CONTROLS ····························································· 4 WHERE TO USE ························································· 5 INSTALLING THE FILTERS ················································ 6 SAFETY AND CAUTIONS · · ··············································· 8 INITIAL OPERATION ····················································· 9 AUTO AND SLEEP ······················································ 10 MANUAL MODE, TIMER AND PLASMAWAVE ®...
CONTROLS Air Outlet Vent PLASMAWAVE Check Filter Indicator Timer Indicator PlasmaWave Indicator LED light indicates when it is If timer has been set, Indicates whether time to change the lter. the LED light Indicates PlasmaWave® is the set time of operation. enabled or disabled.
WHERE TO USE Allow 30 ~ 45 cm of space between TVs, radios, and other electronic products electromagnetic interference from certain electronics may cause product malfunction. Place indoors away from direct sun light direct exposure may cause product malfunction or failure. Only place on hard, flat surfaces flimsy or slanted surfaces may result in abnormal noise and vibrations.
INSTALLING THE FILTERS This product comes with all of the required filters. The protective plastic wrap must be removed from the filters before use. ※ Operating the unit without removing the plastic wrap may result in product failure. ※ Unplug and make sure the unit is turned off before installing filters. ※...
Page 7
※ For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of other filters. ※ Pet filter replacement guide separately mentioned on the Pet filter package board. To purchase replacement Winix filters : contact our authorized distributor FILTER FILTER ‘Ausclimate’...
SAFETY AND CAUTIONS Before operating this equipment, carefully read and follow these safety cautions and instructions to avoid damage and ensure safe use. Ensure filters are inserted before running unit running unit without filters can shorten the units life and cause electric shock or injury. Be sure foreign objects are NOT inserted into the vents on the unit objects can include pins, rods, and coins.
INITIAL OPERATION Insert the unit plug into an electrical outlet. ① ˍ The Control Panel lights will turn on and off. Press the 'Power' button. ② ˍ During the first 4 minutes of power up, the Air Quality light NOTE will flash as the Smart Sensors measure the air quality in the environment, after which normal operation will begin.
AUTO AND SLEEP Every time the Mode button is pressed, the Mode LED light will cycle through the settings. (Auto, Sleep, Low, Medium, High, Turbo) 1. Auto Mode Enables Auto operation based on the unit's air quality Smart Sensors. Press the Mode button to select Auto mode. ①...
MANUAL MODE, TIMER AND PLASMAWAVE ® Every time the Mode button is pressed, the Mode LED light will cycle through the settings. (Auto, Sleep, Low, Medium, High, Turbo) 3. Manual Mode (setting fan speed) Users can opt to manually set the fan speed to Low, Medium, High, or Turbo. Press the Mode button to select the desired ①...
CHILD LOCK, AIR QUALITY LED LIGHT 6. Child Lock This feature prevents children from tampering with the control panel. Press and hold the Child Lock button for ① 3 seconds to enable or disable the feature. ˍ When the Child Lock indicator is lit, the feature is enabled.
※ For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of other filters. ※ Pet filter replacement guide separately mentioned on the Pet filter package board. To purchase replacement Winix filters : contact our authorized distributor FILTER FILTER ‘Ausclimate’...
Page 14
First remove the Deodorization filter and ③ then the True HEPA filter by pulling on the numbered tags at the top of each filter. ˍ For optimal performance, only genuine Winix filters should NOTICE be used with this unit. ZERO + English...
Page 15
FILTER CARE 3. Filter Assembly and Replacement Filters should be re-installed in the reverse order of their removal. Insert the replacement ① True HEPA filter (rear) True Deodorization filter (middle) HEPA lter ˍ Remove the protective plastic wrap from new filters. Operating the unit without removing the protective plastic wrap Deodorization may cause abnormal noise, deformation,...
Page 16
FILTER CARE 4. Cleaning the Pre-filter Intervals between filter cleanings may vary depending on the air quality. Use a vacuum cleaner or soft brush to clean ① the Pre-filter. If it is excessively dirty, wash with room temperature water. ˍ Use only water, do not use volatile substances such as alcohol or acetone.
CLEANING THE DUST SENSOR Cleaning the Dust Sensor For optimal performance of the Dust Sensor, which detects airborne dust and ultrafine particles, clean it every two months. Clean it more frequently when the unit is running in a place with high dust levels. Open the Dust Sensor cover.
CLEANING CARE Cleaning the exterior and interior Cleaning the exterior Wipe with a soft damp cloth using room temperature water. Afterwards, wipe it down with a clean dry cloth. ˍ For optimal performance, clean the front panel 1-2 times a month. Cleaning the interior Open the front panel and clean the interior with a vacuum cleaner.
FREQUENTLY ASKED QUESTIONS Problem Check / Actions to take It does not turn on at all. ˍ Is there a power outage? - Check to see if other lights and electrical equipment are working and try again. It doesn’t work in Auto mode.
Page 20
FREQUENTLY ASKED QUESTIONS Problem Check / Actions to take The power plug and outlet feel hot. ˍ Is the plug securely plugged in? - Make sure the plug is properly plugged into the outlet. There is a strange smell. ˍ Is it being used in a place with a lot of smoke, dust, or odors? - Clean the air intakes on the front sides of the unit and clean the pre-filter.
UNIT SPECIFICATIONS Model Name AUS-1250AZPU Power Voltage 220 - 240 V, 50 / 60 Hz Power Rate 50 W Recommended room 49.5 m capacity Weight 8.5 kg Dimensions 415 mm(W) x 245 mm(D) x 600 mm(H) FILTER GU, item : 1712-0095-01 Replacement Filter FILTER GJ, item : 1712-0092-01 ※...
SAFETY INSTRUCTIONS Thank you for purchasing a Winix air purifier. This product is for household use only. IMPORTANT CAUTIONS FOR IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER USING YOUR AIR PURIFIER WARNING : Follow the instructions in this ˍ Do not block the intake or outlet vents.
PRODUCT WARRANTY Air Purifier Product Name AUS-1250AZPU Model Name Purchase Date Two (2) years Warranty period Place of purchase Place of purchase Tel. Address Customer Name Tel. ※ After purchase, be sure to complete all of the above information. ZERO + English...
Page 24
2610-0208-00 Rev.00 Contact for product To expedite service, please specify the model name and number, the related inquiries and nature of the problem, your contact information, and your address. customer service Distributed by After sales and warranty enquiries, visit website or call 1800 122 100 Ausclimate Pty Ltd Website : www.ausclimate.com.au / www.winixaustralia.com.au...
Need help?
Do you have a question about the ZERO+ AUS-1250AZPU and is the answer not in the manual?
Questions and answers