Table of Contents
Advertisement
Setting Up the Projector
Using the Focus and Zoom
• Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector placement.
• See pages 10, 11 and 12 for details on projector setup.
SIDE VIEW
2
POWER
POWER indicator
3
Zoom ring
(Lens housed)
4
Lens focusing ring
5
Zoom ring
(Maximum picture size)
E-9
LAMP
TEMP.
(Wide angle)
(Minimum picture size)
(Zoom)
Zoom
Ceiling setting
Table setting
Zoom
1. Turn on the MAIN POWER
Turn on the MAIN POWER switch on the back of the
projector.
2. Turn on the POWER
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control to turn on the
power.
3. Rotating the zoom ring (from the
housed position to the wide angle
position)
Rotate the zoom ring on the lens until it clicks. The pic-
ture can be adjusted within the zoom range.
4. Adjusting the focus
Rotate the lens focusing ring until the image on the
screen is in focus.
5. Adjusting the zoom
Rotate the zoom ring. The picture can be adjusted to the
desired size within the zoom range.
Invert Image
Advertisement
Table of Contents
