Computer Image Adjustments (Input 1 Or 2 Mode Only); Adjusting The Computer Image - Sharp XG - P10XU Operation Manual

Computer Image Adjustments (INPUT 1 or 2 mode Only)

Projector
(GUI) On-screen Display
2
3
E-29
Remote control
1, 5
2, 3, 4

Adjusting the Computer Image

When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust "Clock", "Phase",
"H-Pos" and "V-Pos" for the optimum computer image.
Description of Adjustment Items
Selected item Description
Clock Adjusts vertical noise.
Phase Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos Centers the on-screen image by moving it to the left or right.
V-Pos Centers the on-screen image by moving it up or down.
• Computer image adjustments can be made easily by
pressing AUTO SYNC ( ). See page 32 for details.
Select the desired computer input mode with INPUT.)
(
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select "Reset" on the "Fine
Sync" menu screen and press ENTER.
MOUSE ADJ.
mark of the selected