National Instruments PCI-GPIB Installation Manual page 5

6. Touch a metal part on your chassis to discharge any static electricity that might
be on your clothes or body.
7. Insert the PXI-GPIB into the selected slot. Use the injector/ejector handle to
fully inject the device into place. Figure 2 shows how to install the PXI-GPIB
into a PXI or CompactPCI chassis.
8. Screw the front panel of the PXI-GPIB to the front-panel mounting rail of the
PXI or CompactPCI chassis.
9. Power on your PXI or CompactPCI chassis. The PXI-GPIB interface board
is now installed.
© National Instruments Corporation 5 Installing Your GPIB Hardware and NI-488.2 for Solaris