Compatibility; What's In The Box - Bondtech Prusa i3 Assembly And Installation Manual

Compatibility

The upgrade is compatible with the following machines:
- Prusa i3 MK2
- Prusa i3 MK2s
- Prusa i3 MK2,5
- Prusa i3 MK3

What's in the box?

All customers
1x Bondtech extruder for Prusa i3.
1x PTFE tube (80mm).
1x SLS printed Extruder front.
1x SLS printed Extruder rear.
1x Bag with screws and bolts.
1x Fan shroud.
1x Mounting bracket.
MK2, MK2s, MK2.5 and MK3 without BMG
1x Nema17 Pancake stepper motor.
1x Stepper motor cable.
1x Shaft with 50T gear.
1x Thumbscrew.
2x Ball bearings.
1x 3x32mm shaft.
1x Sensor cover
MK2 and Mk2s
2x Needle bearing.
1x 3x20mm shaft.
1x Primary drive wheel (direct).
1x Secondary drive wheel (direct).
1x Sensor cover
Installation manual extruder upgrade for Bondtech_Prusa_i3 V1.1 2