Printer Takes A Long Time To Start Printing; Printing Cancels - Sharp AR-C265P User Manual

Printer takes a long time to start printing

Possible cause
The printer has to
warm up returning
from power save mode.
The image drum
carries out a cleaning
process to ensure print
quality, which takes
time.
The fuser unit adjusts
temperature, which
takes time.
The printer is
processing data from
another interface.

Printing cancels ___________________

Possible cause
The printer interface
cable is faulty.
The time out setting is
too short.
Remedy
In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode (SYS CONFIG
MENU → POW SAVE TIME).
Wait until this process has been completed.
Wait until this process has been completed.
Wait until this data is processed.
Remedy
Replace the printer interface cable.
Reset time out in the menu to a higher value
(SYS CONFIG MENU → WAIT TIMEOUT).
Sharp AR-C265P User's Guide
158