BenQ CinePrime W2700 User Manual page 25

Color Temperature
There are several preset color temperature settings available. The available settings
may vary according to the signal type selected.
You can also set a preferred color temperature by adjusting the following options.
Color Management
This function provides six sets (RGBCMY) of colors to be adjusted. When you
select each color, you can independently adjust its range and saturation according
to your preference.
Advanced
(Continued)
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
• Preset: Selects a color temperature from among Normal, Cool, Lamp
Native, or Warm.
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red,
Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of
Red, Green, and Blue.
• Primary Color: Selects a color from among R (Red), G (Green), B (Blue), C
(Cyan), M (Magenta), or Y (Yellow).
• Hue: Increase in the range will include colors
consisted of more proportions of its two
adjacent colors. Please refer to the illustration
for how the colors relate to each other.
For example, if you select Red and set its range
at 0, only pure red in the projected picture will
be selected. Increasing its range will include red
close to yellow and red close to magenta.
• Saturation: Adjusts the values to your
preference. Every adjustment made will reflect to
the image immediately. For example, if you select Red and set its value at 0,
only the saturation of pure red will be affected.
• Gain: Adjusts the values to your preference. The contrast level of the
primary color you select will be affected. Every adjustment made will reflect to
the image immediately.
Yellow
RED
GREEN
Cyan
Magenta
BLUE
Menu operation 25