Table of Contents
Advertisement
LOADING PAPER INTO THE PAPER TRAY
When loading index cards, postcards or birthday cards
1) Set the paper knob to the "Thick Paper (
card print side down.
2) Set guide
Most paper and envelopes will be fed correctly from the paper tray. However, if
paper or envelopes are particularly stiff or heavy, they should be fed one at a
time through the bypass tray. This will avoid wrinkling or misfeeding.
It is recommended that you perform test printing on normal paper before printing
on the card.
Close the front lid of paper tray by firmly pushing on its right
5
edge.
With some sizes of paper, guide
print with the front lid of the paper tray open.
Attach the output tray.
6
20
up, and then fit guide
may stick out of the paper tray. In this case,
Place this projection
toward the printer.
)" setting, and then load the
Be sure to load in
portrait direction.
and
against the loaded cards.
Advertisement
Table of Contents
