Table of Contents
Advertisement
Cautions
Follow the cautions below when using this unit.
The unit is affected by the environment in which it is installed. Do not install your unit
in the following area.
−Dusty areas
If dust enters the internal parts of the unit, damage or poor-quality output can
result.
−Areas in direct sunlight
Direct sunlight can distort the plastic parts of the unit and result in poor-quality
output.
−Excessively hot, cold, humid, or dry areas (for example, near heaters, humidifiers,
or air conditioners)
This may result in damp paper, condensation within the internal mechanisms,
misfeeds, and dirty output.
Operating Conditions
Temperature : 10-35 degrees Celsius (50-95 degrees Fahrenheit)
Relative humidity : 20%-85%
Note : When the temperature reaches 30 degrees Celsius (86 degrees Fahrenheit),
the relative humidity must be 60% or less.
The power outlet should be installed near the equipment, and should be easily
accessible.
When moving the unit, be sure to first turn the power button off, and then remove the
power cord from the outlet.
Place the unit on a firm, level surface.
Be sure to use only ink tanks of SHARP genuine supplies.
If you get ink spots on your skin, wash them with water as soon as possible.
Store the spare ink tanks out of the reach of children.
Advertisement
Table of Contents
