Rear Side; Bypass Tray; Power Socket; Jam Cover - Sharp AJ-2200 Setup And Operation Manual

PART NAMES AND FUNCTIONS

Rear Side

USB interface connector (B type)
Use a USB cable to connect the printer
to your computer. It is possible to insert
the cable after the printer has been
switched on.
Parallel interface
connector (36pin)
Use a parallel interface cable
(IEEE1284) to connect the
printer to your computer.
* When the power cord is connected to the outlet, power for the printer is turned on automatically.
8

Bypass tray

Use this tray to print on a single page.
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)

Power socket

Plug the power cord *
into the socket.

Jam cover

Open this cover to remove
jammed paper.