Audiovox AVX10USB Installation And Operation Manual page 14

Remote Control functions(Continued)
23. FMM ON/OFF
Turns the FM Modulator power on/off.
24. AUDIO
Press to display and select audio language in DVD mode. Each time this button is pressed,
the language changes.
25. PIX ( Picture Select )
This button is used to make picture adjustments. Use the UP or DOWN direction buttons
to select BRIGHTNESS, CONTRAST,COLOR, TINT, or RESET. Use the UP or DOW buttons
to adjust the setting. The OSD will automatically disappear if no adjustments are made
within 6 seconds.
26. VOLUME DOWN (-) or UP (+)
Press to select the increase or decrease the volume for the wired headphones.
27. STOP (n)*
Press to stop playback. (Playback will resume from the point it is stopped).
Press twice to stop playback fully. (Playback will resume from the beginning of the disc).
Note: For MP3 or photo mode, press twice to return to Audio/Photo/Video option
menu.
28. SETUP**
No function on this model.
User can use the system to select the function may need.
29. MUTE
Press this button to mute the audio for the wireless FM Modulator, IR headphones and
audio output.
Pressing the button again restores the audio to the previously set level.
30. TV Mode Select
Switches certain function keys on the remote control for monitor functions.
31. MONITOR SELECT
M1 Button – Set the remote control code to allow control of the unit in M1 mode.
M2 Button – Set the remote control code to allow control of the unit in M2 mode.
Note: M1/M2 operation is only for when 2 systems are installed in the same vehicle. This
allows independent Remote Control and independent playback of audio for each system.
32. EJECT ( )*
Press this button to eject the disc.
15