How To Set Oven Temperature For Bake; How To Proof - Sharp Insight-Pro KB-3425L Operation Manual

Oven COOkinG

HOW tO set Oven teMperature FOr bake

set teMp
Touch Bake pad.
1
tO CHanGe set teMperature DurinG preHeatinG Or aFter Oven is preHeateD:
1 Follow the steps 1-3 above.
During preheating, the Temp pad will appear in the lower right-hand corner of the touchscreen. Touch this
4
pad to do the following:
• Temp x 1: Check the set temperature.
• Temp x 2: Change the set temperature. When you see 000
use the number pads to change the temperature, then touch START.
• Temp x 3: Display shows the actual temperature during preheating. It will read "Temp Lo F" until the
oven reaches 90
Once the oven is preheated, the Temp pad will remain in the display. By touching it once, you can change the
set temperature using the number pads. Then touch START. If you touch it a second time, it will once again
show the set temperature.

HOW tO prOOF

The Insight Range has an automatic setting for proofing bread dough at 100
the Bake pad. The oven temperature can also be set manually for 90-100
using the oven and the residual temperature is 105˚F or higher, when you enter 90-100˚F or select Proof and touch the START
pad, the oven will display "OVEN TOO HOT". The oven will not start until it cools below 105˚F, a safe temperature for yeast.
When the oven cools, the oven display will change to "Touch START". Simply touch the START pad and the oven will maintain
90-100˚F for proofing.
2:40
PM DEC 22
Convection Reheat
Bake Defrost
Broil Micro Cook
Touch number pads or pre-set pads for
2
desired temperature.
F.
o
Touch START pad. When the oven
3
reaches the programmed temperature, a
signal will sound.
in the lower left-hand corner of the touchscreen,
o
F. You can access the "Proof" pad by touching
o
F for proofing bread dough. If you have just finished
o
0