Multiple Sequence Cooking; To Set Power Level - Sharp Insight-Pro KB-3425L Operation Manual

Multiple sequenCe COOkinG

The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting
to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power
level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power .
2:40
PM DEC 22
Convection Reheat
Bake Defrost
Broil Micro Cook
Enter cooking time by touching
1
number pads
500
2:40
PM DEC 22
Convection Reheat
Bake Defrost
Broil Micro Cook
Enter second cooking time
4

tO set pOWer level

There are eleven preset power levels.
using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.
tOuCH pOWer
level paD nuMber
OF tiMes FOr
DesireD pOWer
If Power Level is not touched
Power Level x 1
Power Level x 2
Power Level x 3
Power Level x 4
Power Level x 5
Touch Power Level 3 times to choose
2
. 70%. You can omit this step when you set
100% power. Touch Multiple Sequence.
. Touch Power Level until 50% Stage 2
5
3000
appears in the display. Touch START.
apprOxiMate COMMOn
perCentaGe WOrDs FOr
OF pOWer pOWer levels
100%
90%
80%
70% Medium High
60%
50% Medium
MiCrOWave DraWer COOkinG
tOuCH pOWer
level paD nuMber
OF tiMes FOr
DesireD pOWer
High Power Level x 6
Power Level x 7
Power Level x 8
Power Level x 9
Power Level x 10
Power Level x 11
1
Note that 100% stage 2 appears in the
3
banner.
The display will begin counting down
6
the total cooking time.
During cooking, the power level will
appear in the display. At the end of
Stage 1, the microwave will automatically
change to Stage 2.
apprOxiMate COMMOn
perCentaGe WOrDs FOr
OF pOWer pOWer levels
40%
30% Med Low /Defrost
20%
10%
0%
100%
Low
High