Specifications - Sharp HT-SL50 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
General
Power source AC 120 V ~ 60 Hz
Power 25 W
consumption
Output power RMS: Total 100 watts
RMS:
Front Left/Right:
25 watts per channel into 4 ohms at
1 kHz, 10% total harmonic distortion
Subwoofer:
50 watts per channel into 8 ohms at
100 Hz, 10% total harmonic distortion
FTC:
Front:(Left/Right):
Minimum 24 watts per channel into
4 ohms at 200 Hz to 20 kHz, 1% total
harmonic distortion
Subwoofer:
Minimum 50 watts per channel into
8 ohms at 100 Hz, 1% total harmonic
distortion
Output HDMI™ output: (audio/video support to
terminal 1080p) x 1
Input Analog input (Audio in):
terminal Stereo mini jack Ø 3.5 mm
HDMI input: (audio/ video support to
1080p) x 1
Soundbar speaker
Type Full Range speaker system
7/8" x 4-1/2" (2.2 x 11.5 cm)
Full Range
Maximum 50 W/CH
input power
Rated input 25 W/CH
power
Impedance 4 ohms/CH (3 pieces parallel)
Dimensions Width: 31-1/2" (801 mm)
Height: 1-1/16" (26 mm)
Depth: 2" (50 mm)
Weight 1.46 lbs. (0.66 kg)
Subwoofer
Type Subwoofer system
6 - 5/16" (16 cm) woofer
Maximum 100 W
input power
Rated input 50 W
power
Impedance 8 ohms
Dimensions Width: 4 - 1/2" (115 mm)
Height: 16 - 5/8" (422 mm)
Depth: 12 - 1/16" (307 mm)
Weight 9.92 lbs. (4.50 kg)
E-15