Recommended Location; Gateway Configuration - ABB Cassia X1000 Installation Manual

Smart sensor gateway
Hide thumbs Also See for Cassia X1000:
Table of Contents

Advertisement

2.2

Recommended Location

Height:
Recommended height for the Gateway is 3-30 meters from ground level. Lower
-
levels are also acceptable but they might have weaker Bluetooth signal levels due
to obstacles.
Orientation:
Gateway has the best reception to the direction where the Cassia logo is shown
-
on its side. If the Gateway has troubles connecting to a specific Smart Sensor, it is
recommended to rotate the Gateway to point directly to that direction.
2.3

Gateway Configuration

When the Gateway is powered on, the blue LED at the bottom of the Gateway turns ON.
After bootup the Gateway will turn on the configuration WIFI hotspot. The bootup takes
about 30-60 seconds.
Configuration WIFI hotspot has SSID "cassia-XXXXXX", where XXXXXX is the last 6 digits
of the Gateway's MAC address. MAC address can be found from the bottom of the
Gateway. Password for this WIFI hotspot is the same as the SSID.
Connect to this WIFI hotspot with the device used for configuration (computer, phone or
tablet) and open the web browser. Type 192.168.40.1 to the web browser's address field
and press enter. Cassia configuration page will open. During the first login the default
password needs to be changed. Default credentials are:
Login: admin
-
Password: admin
-
2 019 -0 2 -08
Figure 2 Cassia Login Page
S MART S ENSO R G AT EWAY
5 /16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents