Dial Mode; Temporary Tone Dialing; Photo Speed Dial - VTech SN5147 User Manual

Dial mode

The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Settings, and
then press SELECT.
3. Press q or p to choose Dial mode,
then press SELECT.
4. Press q or p to choose Touch-tone
or Pulse, then press SELECT to confirm
your selection. You hear a confirmation
tone.

Temporary tone dialing

If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This is
useful if you need to send touch-tone
signals to access your telephone banking
or long distance services.
1. During a call, press TONE
2. Use the dialing keys to enter the
number. The telephone sends touch-
tone signals. It automatically returns to
pulse dialing mode after you end the
call.
*
.
18

Photo speed dial

There are eight photo speed dial direct
memory keys 1 to 8 on the telephone
base, and four direct memory keys M1 to
M4 on the cordless handset.
You can store the telephone numbers
you wish to quick dial to the photo speed
dial keys. When you set the first four
photo speed dial keys 1, 2, 3 and 4 on the
telephone base, the same numbers will
also automatically set in the M1, M2, M3
and M4 keys on the cordless handset.
• We recommend you store at least two
contacts that you may need to call them
more often or immediately to photo speed
keys 1 and 2.