Redial List; Review A Redial List Entry; Dial A Redial List Entry; Delete A Redial List Entry - VTech SN5147 User Manual

Redial list

The cordless handset stores the last 10
telephone numbers dialed. Entries are
shown in reverse chronological order.
When there are already 10 entries, the
oldest entry is deleted to make room for
the new entry. The telephone base stores
the last number dialed only.

Review a redial list entry

Using a cordless handset:
1. Press and hold REDIAL when the
handset is not in use.
2. Press q or p until the desired entry
displays.

Dial a redial list entry

Using a cordless handset:
1. Press and hold REDIAL when the
handset is not in use.
2. Press q or p until the desired entry
displays.
3. Press TALK or
Using the telephone base:
1. Lift the corded handset.
2. Press and hold REDIAL to dial the last
number.

Delete a redial list entry

Using a cordless handset:
1. Press and hold REDIAL when the
handset is not in use.
2. Press q or p to browse to the desired
entry.
3. Press DELETE to delete the displayed
number. You hear a confirmation tone.
to dial.

Intercom

You can use the intercom feature for
conversations between the telephone base
and the cordless handset. If you have two
or more cordless handsets, you can make
intercom calls from the telephone base to all
cordless handsets, or from one handset to
another or to the telephone base.
• Your telephone base supports up to
four cordless handsets. You can buy
additional expansion handsets (SN5107) or
photo speed dial handsets (SN5307) for this
telephone base.
Make intercom call using the cordless
handset:
1. Press MENU, then press q or p to
scroll to Intercom and then press
SELECT.
• If you have no additional
expansion handset or photo
speed dial handset, the cordless
handset displays Calling base. The
telephone base rings.
• If you have other registered
handsets, the cordless handset
displays INTERCOM TO:. Press q or
p to choose a desired device and
then press SELECT.
You may also enter a destination
handset number (1-4), or press 0
for the telephone base, or press
*
TONE
The destination device rings. If you
have two or more cordless handsets,
the destination handset displays
HANDSET X is calling or HANDSET X is
calling all.
27
for all devices.