On-Screen Display Menu
On-Screen Display Menu Operation
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
1 Press c/d to select the desired item.
2 Press a/b to select the desired item.
3 Press c/d to adjust the item.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Press to open or close the menu screen.
Press to select a desired item on the screen or
adjust a selected item.
Press to go to the next step or complete the
Press to return to the previous step.
On : Display
AQUOS LINK Setup
PC Audio Select
Digital Caption Info.
Program Title Display
Operation Lock Out
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates that the item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input
Menu options differ in the selected input modes, but the
operating procedures are the same.
The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
[Input 4 (PC)]
MENU: MENU on the remote
INPUT: ENTER on the remote
CHr/s: Cursor a/b on the
VOLk/l: Cursor c/d on the