Cisco Nexus 1000V Installing Manual page 14

Installing the VSM Software
To install and configure the VSM workflow, create a Microsoft switch for VSM connectivity and then
perform the following steps:
1.
2.
3.
Connecting SCVMM to VSM
Once the VSM is up, configure the SCVMM networking fabric for the Nexus 1000V.
Check and turn off the proxy server settings for your LAN in the Internet Options settings window of
Note
Internet Explorer before proceeding to the next steps.
This section includes the following:
•
•
Connecting SCVMM 2012 SP1 to VSM
To retrieve the objects from the VSM to SCVMM, perform the following steps:
When the VSM is up, log in to the VSM using SSH and the IP address configured in the previous section.
Step 1
From the SCVMM administrator console, navigate to the Fabric pane.
Step 2
On Fabric Pane under Networking, select Switch Extension Manager.
Step 3
Right click to add a New Extension Manager. The Add Virtual Switch Extension Manager Wizard
Step 4
window is displayed.
In the General panel of the Add Virtual Switch Extension Manager Wizard window, enter the
Step 5
connection settings for the extension manager as outlined in the following steps:
Cisco Nexus 1000V for Microsoft Hyper-V Installation Guide, Release 5.2(1)SM1(5.2)
1-14
Connecting SCVMM to VSM, page 1-14
Creating a Logical Switch in SCVMM, page 1-16
Configuring the VM Network, page 1-17
Connecting SCVMM 2012 SP1 to VSM, page 1-14
Connecting SCVMM 2012-R2 to VSM, page 1-15
Select a manufacturer, for example, Cisco Systems.
a.
Select the model type, for example, Nexus 1000V.
b.
Select the configuration provider for the extension manager, for example, Cisco Systems Nexus
c.
1000V.
Enter the IP address of the VSM in the connection string, for example, http://10.10.10.4.
d.
Create a run as account for the VSM. In the Run As account field, click Browse... The Select
e.
a Run As Account window opens up.
In the Select a Run As Account window, select an account from the available options or click
f.
Create Run As account tab to create an account for the VSM. A Create Run As account
window opens up.
In the Create Run As account window, enter the following VSM credentials:
g.
Enter the name of the account in the Name field as VSM_admin.
–
Enter the description of the account in the Description field.
–
Enter the user name in the User Name field and the password in the Password field.
–
Confirm the password in the Confirm password field.
–
Chapter 1 Installing the Cisco Nexus 1000V for Microsoft Hyper-V
OL-30997-01