Changing System Settings; Changing Channel Display - Sharp Aquos LC 26D5U Operation Manual

Watching TV (TV Guide On Screen)

Changing system settings

After you initially complete Guide Setup, you can make
changes to System settings in the "SETUP" screen.
1
Press TV GUIDE and then press MENU.
2
Press a/b to select "go to Service Bar" in
"Episode Options", and then press ENTER.
3
Press c/d to select "SETUP" .
4
Press b to select "Change system settings".
5
Press ENTER to display the "Confirming
Your Settings" screen.
• If you want to change System settings, select
"No, repeat setup process" and then press
ENTER.
• If the setting details displayed on the screen is
correct, select "Yes, everything is correct", and
then press ENTER.
• If the channel lineup is incorrect, select "Yes,
but my channel lineup is incorrect", and then
press ENTER.

Changing channel display

This setting lets you edit channel information that
appears in LISTINGS.
You can set each function as follows:
1. Re-order the position the channel appears in
LISTINGS
2. Change the channel number
3. Switch a channel
• On - the channel is always displayed
• Off - the channel is never displayed
• Auto-Hide - the channel is only displayed when
program information is available
1
Repeat steps 1 to 3 in Changing system
settings.
2
Press a/b to select "Change channel
display", and then press ENTER.
3
Press ENTER to display the "Grid Options"
screen.
4
Press a/b/c/d to set the following items.
Selected item
channel
off/on/auto-hide
service
Air/Cable/Cablebox
tune channel
Set the channel number you want to display
position
Set the channel display position.
• Depending on the channel currently being received you
may be able to select "service".
5
Press a/b to select "done", and then press
ENTER to exit.
Description
31