Changing Default Options - Sharp Aquos LC 26D5U Operation Manual

Watching TV (TV Guide On Screen)

Changing default options

This setting lets you change the default settings as
follows.
General default options
1
Press TV GUIDE and then press MENU.
2
Press a/b to select "go to Service Bar" in
"Episode Options", and then press ENTER.
3
Press c/d to select "SETUP" .
4
Press b to select "General default options",
and press ENTER.
5
Press MENU to display "General Defaults".
6
Press a/b/c/d to set the following items.
Setup
Selectable items
items
Info box size last used/no/small/
large
box cycle all/no only/small only/
large only/no & small/
no & large/small &
large
auto guide on/off
7
When you have finished, press a/b to
select "done", and then press ENTER again
to exit.
32
Record default options
1
2
3
4
5
Setup
items
start
end
recorder
Description
Set the initial info box
6
size when you enter
the TV Guide On
Screen
Set the info box
rotation when you
press INFO
When this is set to
"on", automatic entry
into the TV Guide On
Screen when you turn
on the TV
Press TV GUIDE and then press MENU.
Press a/b to select "go to Service Bar" in
"Episode Options", and then press ENTER.
Press b to select "Record defaults", and
press ENTER.
Press ENTER to display "Record Defaults".
Press a/b/c/d to set the following items.
Selectable items
on time/120 min early Set the start timing of
... 120 min late recording
on time/120 min early Set the end timing of
... 120 min late recording
VCR Set the external
recording device
When you have finished, press a/b to
select "done", and then press ENTER again
to exit.
Description