Replacing The Bearings - scope R4C Maintenance Manual

FRONT
WHEEL

REPLACING THE BEARINGS

To replace the bearings you'll need the following tools:
• Bearing Installation Tool (T1/T2/T3)
• Long Bearing Presshead (T4)
• Short Bearing Presshead (T5)
• 15mm Guide (T9)
1
Apply a small amount of grease on both
bearing seats of the hub.
2
Carefully place one bearing (2) in the bearing
seat without applying pressure.
3
Place the long 1524/1528 (T5) presshead and
15mm guide (T9) on the bearing removal tool
(T1&T2) with the 1524 side facing the hub.
4
Slide the tool into the hub and place the short
1524/1528 (T5) presshead on the opposite side,
then screw on the handle (T3).
10