Color Kinetics iPlayer 3 User Manual page 18

Automating Show Playback
When using alarms, you do not have to manually press a Preset button or keypad
button to trigger show playback. Alarms automatically set off triggers based on
settings such as time of day or an astronomical event, such as sunset. You can
configure up to 15 alarms on iPlayer 3.
Run Mode LCD Output
09:21:36
RUN Mode
Show 1
/ b100
The iPlayer 3 LCD displays the following information during Run Mode:
Light Show Brightness
Using the and buttons, you can set the overall brightness level of lights in a
show during playback. The B number displayed on the LCD reflects the brightness
level you set, between 0% and 100%.
Trigger Number Message
The LCD displays the current show (trigger) number during playback. If you have
not associated a trigger with a Preset button, the LCD displays an EMPTY message
when you press that Preset button.
Lights Off
You can pause Run Mode and show playback at any time by pressing the
The LCD displays a LIGHTS OFF message, and the connected lights turn black until
you either:
Press the button a second time to resume Run Mode
•
Press a Preset button to start the selected show from the beginning
•
LED Indicator Light
The LED indicator light, located to the right of the LCD screen, is active when a
show is playing. It shows the color currently displayed on the fixture assigned to
light address 1 on DMX output port 1.
14 iPlayer 3 User Guide
17-Feb-09
>
button.
LED Indicator Light