Sending a Fax by Automatic Dialing
Using an auto-dial number
Once you have stored a fax or phone number, you can use it to send a fax or
make a phone call.
1
If you are sending a fax, load the
document(s).
•
If desired, press
resolution and/or contrast.
2
Press
(or
display (if no name was stored, the number will appear).
3
If you are sending a fax, press
•
Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 72).
If you are making a phone call, lift the handset. Dialing begins. (If you
lifted the handset before searching for the number, press
begin dialing.)
44
RESOLUTION/
RECEPTION
to set the
) until the name of the other party appears in the
START/
. Dialing and transmission begins.
MEMORY
READY TO SEND
START/
MEMORY
to