Attachments
Attachments
Points to keep in mind when setting up
Do not place
the machine in
direct sunlight.
About condensation
If the machine is moved from a cold to a warm place, it is possible that
condensation may form on the scanning glass, preventing proper scanning of
documents for transmission. To remove the condensation, turn on the power and
wait approximately two hours before using the machine.
Removing the packing tape
1
Open the operation panel.
2
Open the print compartment cover.
10
Do not place
Keep dust away
the machine
from the machine.
near heaters or
air conditioners.
Keep the area
around the
machine clear.