Messages And Signals - Sharp UX-340L Operation Manual

Messages and Signals

Messages and Signals
Display messages
CHECK PAPER SIZE
COVER OPEN
DOCUMENT JAMMED
FAX RX IN MEMORY
FILM END
FUNCTION MODE
HOLD
LCR DOWNLOADING
DOWNLOAD ERROR
134
The paper size setting is incorrect. Change the paper
size setting as explained on page 23.
The print compartment cover (under the operation
panel) is open. Open the operation panel (grasp the
top and pull toward you), and then press down firmly
on both sides of the print compartment cover to close
it.
The original document is jammed. See the following
section, Clearing Paper Jams.
A fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. The fax will
print out automatically when the problem is fixed.
The imaging film may need replacement. Check the
film and replace if necessary.
The FUNCTION key has been pressed.
The HOLD/SEARCH key has been pressed to put the
other party on hold during a phone conversation.
Press the HOLD/SEARCH again to take the other
party off hold.
The fax machine has called OpenLCR and is
receiving carrier rate data. This message only
appears if you have registered with OpenLCR.
The fax machine was unable to download rate data
from OpenLCR. Try downloading the data manually
as explained in Downloading (receiving) the rate data
manually on page 39.