Using The Key Operator Programs - Sharp AR-FX12 Operation Manual
Facsimile expansion kit
Hide thumbs
Also See for AR-FX12:
- Facsimile operation manual (110 pages) ,
- Operation manual (110 pages) ,
- Service manual (122 pages)
Table of Contents
Advertisement
USING THE KEY OPERATOR PROGRAMS
Follow these steps to configure the settings in the key operator programs.
1
Press the [CUSTOM SETTINGS] key.
2
Touch the [KEY OPERATOR PROGRAMS]
key.
DEFAULT
LIST PRINT
SETTINGS
FAX DATA
SENDER CONTROL
RECEIVE/FORWA
KEY OPERATOR PROGRAMS
Use the numeric keys to enter the five-digit
3
key operator code number.
KEY OPERATOR CODE
Supplementary explanation of key operation for key operator programs
KEY OPERATOR PROGRAMS
OPERATION SETTINGS
A
DEFAULT DISPLAY SETTINGS
MUST INPUT NEXT ADDRESS
B
KEY AT BROADCAST SETTING
INITIAL RESOLUTION SETTING
A The name of the program category or particular item to be set will appear on the touch key. The displayed item
is selected by touching the key.
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
C If the settings continue on the following screen(s), touch the
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
For the factory default
setting
for
the
key
operator code number,
see page 2 of the key
operator's guide.
THE NUMBER OF DIRECT ADDRESS/
SENDER KEYS DISPLAYED SETTING
THE NUMBER OF FILE NAME/
SUBJECT KEYS DISPLAYED SETTING
4
Touch the [IMAGE SEND SETTINGS] key.
CONTROL
CONTROL
DEVICE CONTROL
COPY SETTINGS
DOC. FILING
IMAGE SEND
SETTING
SETTINGS
5
Touch the [OPERATION SETTINGS] key or
the [FAX SETTINGS] key to display the key
operator programs.
E SEND SETTINGS
OPERATION SETTINGS
FAX SETTINGS
I-FAX SETTINGS
6
Select the desired program and configure
the setting.
Page 8-2 shows the programs that can be selected.
The settings for each of the programs are explained
on the following pages.
7
Press the [CA] key to exit the program.
These
available on setting screens that
require the entry of numerical values.
OK
1/2
6
6
C
and
keys to move back and forth through
and
keys.
KEY OPERATOR PROGRAMS
keys
and
indicator
(1 15)
15
D
E
are
8
8-3
Advertisement
Table of Contents
