Auto Sync Adjustment; Auto Sync Display Function - Sharp Notevision XG-NV7XU Operation Manual

Digital multimedia projector
Hide thumbs Also See for Notevision XG-NV7XU:
Table of Contents

Advertisement

Computer Image Adjustments
Projector
1, 5
2, 3, 4
AUTO SYNC
button
(GUI) On-screen Display
On-screen Display
g
s
(GUI) On-screen Display
Remote control
Auto Sync
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
When "Auto Sync" is set to "ON":
• The
• The Auto Sync adjustment setting previously made is
• Automatic adjustments can be made by pressing AUTO
• When the optimum image cannot be achieved with Auto
• When inputting DIGITAL signal, the projector automatically
During Auto Sync adjustment, the On-screen Display
changes as shown on the left.
f
• Auto Sync adjustment may take some time to complete,

Auto Sync Display Function

Normally, an image is not superimposed during Auto
Sync adjustment. You can, however, choose to
superimpose a background image during Auto Sync
adjustment.
Adjustment
pressing AUTO SYNC, or automatically by setting
"Auto Sync" to "ON" in the projector's GUI menu.
sync
adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
cleared when the projector's setting is changed.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Auto Sync".
4 Press ß/© to select "ON".
5 To exit from the GUI, press MENU.
SYNC.
Sync adjustment, use manual adjustments. (See the
previous page.)
selects the settings for the best possible picture. You do
not need to adjust any settings.
depending on the image of the computer connected to the
projector.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select "Options".
3 Press ∂/ƒ to select "Auto Sync Disp".
4 Press ß /© to select " " to superimpose a
background image or "
background image during Auto Sync adjustment.
5 To exit from the GUI, press MENU.
MOUSE
ADJ.
MOUSE
ADJ.
" to remove the
E-30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg-nv7xul

Table of Contents