Table of Contents
Advertisement
Quick Reference Control Operation
L Location of Controls
Front Panel
POWER
Press
On.
Press again
Off.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
POWER
Press
On.
Press again
Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs by
using the four categories A, B, C and D. The
channels can be accessed quickly by using
these buttons. (See page 23.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects the TV
adjustments.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and channel select
commands (Channel up/down and Random
Access buttons) to the TV.
In CATV position, sends power and channel
select commands to a cable TV converter.
VCR CONTROL
See page 27.
DISPLAY
Press
Display receiving channel for four
seconds.
Press again
Displays remaining time of
SLEEP TIMER and VIEW TIMER.
Press again
Temporarily displays receiving
channel when in Closed Caption mode.
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under
a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
POWER
– VOL +
POWER
VIEW TIMER
CH
MENU
POWER
– VOL +
POWER
VIEW TIMER
LED
SENSOR AREA FOR REMOTE CONTROL
POWER
TV
VCR
INPUT
1
2
3
4
5
6
7
8
9
FLASHBACK
ENTER
0
100
PERSONAL PREFERENCE
A
B
C
CH
VOL
—
CH
MENU
CATV
REW
PLAY
FF
PAUSE
STOP
REC
PIP
CM SKIP DISPLAY
SWAP
FREEZE
MOVE
TV • VCR • CATV
VIDEO/AUDIO
CH
(VIDEO/AUDIO terminals are also provided on
the rear.)
MENU
CHANNEL UP/DOWN – MENU
(8) Selects next higher channel.
LED
(9) Selects next lower channel.
• Press both at the same time to access the
MAIN MENU screen.
Infrared Transmitter Window
INPUT
Press
mode.
Press again
2 mode.
Press again
3 mode.
Press again
mode.
See page 25.
ENTER
Used in some instances where a VCR or Cable
Converter Box requires an "enter" command
D
after selecting channels, when using the
REMOTE KEYPAD button. (See page 27)
VOL
+
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 21 - 22 for channel presetting.
TV
• Moves the " : " mark of the MENU screens.
MENU
Press
Press again
VCR CH
MUTE
Press
MUTE
Press again
SELECT
• CLOSED CAPTION appears when sound is
muted.
PIP FUNCTION
You can watch two pictures at the same time.
See page 24.
(ENGLISH)
IN 2
TERMINALS
Switch to external video INPUT 1
Switch to external video INPUT
Switch to external video INPUT
Switch back to the original TV
Accesses MAIN MENU.
Exits MAIN MENU.
Mutes sound.
Restores sound.
7
Advertisement
Table of Contents
