Quick Reference Control Operation - Sharp 20F630 L Operation Manual

Quick Reference Control Operation

L Location of Controls
Front Panel
POWER
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs
by using the 4 categories A, B, C and
D. The channels can be accessed
quickly by using these buttons. (See
page 40.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
POWER (DVD/VCR)
Press → On.
Press again → Off.
DVD/VCR CONTROL
See page 47.
REC
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
20F630[11-15].p65
POWER CATV TV
DVD VCR
DISPLAY INPUT
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C D
CH
8
VOL VOL
; :
– +
9
CH
MENU MUTE g SKIP f
VCR-CH
POWER (DVD/VCR) 9 8
PLAY
:
REC
REW FWD
L STOP
( )
PAUSE
J
TV • CATV • VCR • DVD
13
(ENGLISH)
VIDEO IN 2 L-AUDIO-R
(INSIDE DOOR)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and
channel select commands (Channel up/
down and Random Access buttons) to
the TV and VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable
TV converter and DVD control.
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving channel
when in Closed Caption mode.
INPUT
Press → Switch to external video INPUT
1 mode or COMPONENT mode.
Press 2 times → Switch to external
video INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode. See page 45.
ENTER
Used in some instances where a Cable
Converter Box requires an "enter"
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 47)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 37 ~ 39 for channel
presetting.
• Moves the " a " mark of the MENU
screens.
SKIP/VCR-CH
25/3/03, 2:50 PM
Dimension: 140mm x 215mm
13