Sharp 32N-S500 Operation Manual page 18

Sharp color television operation manual 32n-s500
Hide thumbs Also See for 32N-S500:
Table of Contents

Advertisement

Parent Control (V-CHIP operation Continued)
3
Press CH UP ( 8 ) or DOWN ( 9 ) to select "DOWNLOAD",
press VOL (+) or (–) to activate "ON".
4
Press MENU to exit.
L DOWNLOAD V-CHIP DATA
1
If you watch the program with "New Rating System
Data", DOWNLOAD screen will be displayed.
(DOWNLOAD screen)
2
DOWNLOAD screen will disappear, if DOWNLOAD is
finished.
NOTE:
DOWNLOAD would not be started if you don't watch
the program with New Rating System Data.
[3]-B. Additional mode (Example)
1
Repeat steps 1 to 4 of [1] MPAA RATING to access V-
CHIP select mode.
2
Press CH UP ( 8 ) or DOWN ( 9 ) to select "Cdn. ENGLISH
RATINGS", then press VOL (+) or (–) .
(After download, the new rating data)
3
You can select "BLOCK" or "– – – – –" (non BLOCK)
from each RATING by pressing CH UP ( 8 ) or DOWN
( 9 ) and VOL (+) or (–) .
(CANADIAN ENGLISH INDIVIDUAL BLOCK)
18
4
You can select "BLOCK" or "– – – – –" (non BLOCK)
CH
from each RATING by pressing CH UP ( 8 ) or DOWN
CH
( 9 ) and VOL (+) or (–) if your select "Cdn. FRENCH
RATINGS" in step 2.
VOL
VOL
+
(CANADIAN FRENCH INDIVIDUAL BLOCK)
L The
screen displays as follows when the picture is blocked
due to V-CHIP being activated.
A) PIP (Picture In Picture) is OFF
This is shown as page 17 [L To cancel the V-CHIP BLOCK
screen while V-CHIP BLOCK has been activated].
B) PIP is ON
When the Main Picture is blocked, Main Picture will turn to blue
and "V-CHIP has been activated" will be displayed.
(Main and Sub Channel No. are displayed, but Sub Picture is
not displayed.)
This message will remain the same on the screen. Cancel the V-
CHIP BLOCK temporarily at the V-CHIP TIMER mode or change
to other channel in this case.
When the Sub Picture is blocked, Sub Picture will turn to blue
and "V-CHIP has been activated" will be displayed. This message
CH
will remain the same on the screen. Cancel the V-CHIP BLOCK
temporarily at the V-CHIP TIMER mode or change to other
CH
channel in this case.
VOL
VOL
+
CH
CH
V-CHIP TIMER mode during PIP ON
VOL
VOL
+
(Main Picture screen)
(Main and Sub Picture screen)
(V-CHIP TIMER mode)
CH
CH
VOL
VOL
+
1 2
1 2
Main
Picture
Sub
Picture
1 2

Advertisement

Table of Contents
loading

Table of Contents