HIKVISION DS-6700HQHI-SATA Quick Start Manual page 4

DS-6700HQHI-SATA Series Encoder Quick Start Guide
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into "Warnings" and "Cautions"
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
safeguards to prevent serious
injury or death.
Warnings
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
●
end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
●
and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
●
100~240 VAC, 48VDC or 12 VDC according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
●
hazard.
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
●
please contact the service center.
Follow these Cautions
precautions
potential injury or material
damage.
3
Follow these
to prevent