Rear Panel - A-Neuvideo ANI-42HPIP Instruction Manual

A NEUVIDEO
BACK Panel
HDMI IN 1~4: Connect to HDMI source equipment such as media players, game consoles or set-top boxes. DVI source equipment
q
may be connected by using an HDMI to DVI adapter.
HDMI OUT A~B: Connect to HDMI TVs, monitors or amplifiers for digital video and audio output. DVI display equipment may be
w
connected by using HDMI to DVI adapter.
L/R OUT: Connect to powered speakers or an amplifier using a 5-pin adapter cable for balanced stereo analog audio output.
e
NOTE: Only LPCM 2.0 sources are supported. Bitstream audio sources will be muted automatically.
COM: Connect directly to a PC, laptop or other serial control device with a 3-pin adapter cable to send RS-232 commands to control
r
the unit.
CONTROL: Connect directly, or through a network switch, to your PC/laptop to control the unit via Telnet/WebGUI.
t
SERVICE: This slot is reserved for firmware update use only.
y
DC 12V: Plug the 12V DC power adapter into the unit and connect it to an AC wall outlet for power.
u
Operation controls & Functions
5