Operation Controls & Functions; Front Panel - A-Neuvideo ANI-42HPIP Instruction Manual

A NEUVIDEO

Front Panel

POWER: Press this button to power the unit on (green LED) or place it into stand-by mode (red LED).
q
IR WINDOW: Accepts IR signals from the included IR remote for control of this unit only.
w
MATRIX A/B IN1~IN4: These input selection buttons behave differently depending on the current input and output resolutions in use.
e
A. ALL INPUTS AND OUTPUTS ARE BELOW 4K:
for display on the associated output (A or B).
B. ANY INPUT OR OUTPUT IS 4K:
both outputs simultaneously.
NOTE: Audio for both outputs will follow the most recently selected input (from A or B) in both modes.
MULTIVIEW: Press any of these buttons to switch immediately to the corresponding Multiview output mode.
r
WINDOW SOURCE SELECT:
t
output modes.
MENU: Press to enter the LCD menu, or to back out from menu Items.
y
ENTER: Press to confirm a selection within the LCD menu or to go deeper into a menu item.
u
+ & −:
Press to move up and down or adjust selections within menus.
i
LOCK: Press to lock all button functions on the front panel. Press the button again to release the lock function. The LCD will display a
o
"Lock" message when the function is active.
PRESET: Press this button to switch between the "Preset Load" and "Preset Save" modes. Pressing the button a 3rd time exits the
a
Preset menu.
A. PRESET SAVE: When in "Preset Save" mode, pressing the "Enter" button will save the currently displayed window layout.
B. PRESET LOAD: When in the "Preset Load" mode, pressing the "Enter" button will load the previously saved window layout.
NOTE: The audio selection is not saved as a part of the preset, only the window layout.
LCD WINDOW: Displays the unit's menu, settingss and information.
s
Press any of these buttons to seamlessly switch to the selected input (IN1~IN4)
Press any of these buttons to seamlessly switch to the selected input (IN1~IN4) for display on
Press these buttons to sequentially switch through the available inputs for each window in Multiview
Operation controls & Functions
4