Rs-232 / Telnet Commands - A-Neuvideo ANI-42HPIP Instruction Manual

A NEUVIDEO
RS-232 & Telnet Commands
BASIC COMMANDS
COMMAND
HELP 8
? 8
GET FW VER 8
GET MODEL NAME 8
GET MODEL TYPE 8
SET FACTORY DEFAULT 8
SET POWER N1 8
GET POWER 8
SET SYSTEM REBOOT 8
SET KEYLOCK N1 8
GET KEYLOCK 8
ETHERNET CONFIGURATION
COMMAND
GET MAC 1 ADDR 8
SET IP MODE N1 8
GET IP MODE 8
GET IPCONFIG 8
SET IPADDR N1 8
GET IPADDR 8
SET NETMASK N1 8
GET NETMASK 8
SET GATEWAY N1 8
GET GATEWAY 8
VIDEO COMMANDS
COMMAND
SET IN N1 NAME N2 8
GET IN N1 NAME 8
SET OUT N1 NAME N2 8
GET OUT N1 NAME 8
DESCRIPTION
Show the full command list.
Show the full command list.
Show the current firmware version.
Show the model name.
Show the model type.
Reset the unit to its factory defaults.
Turn the unit on or off (standby).
Show the current power state.
Reboot the unit.
Enable or disable the front panel key lock.
Show the current front panel lock state.
DESCRIPTION
Show the unit's MAC address.
Set the IP mode of the unit.
Show the current IP mode.
Show the current IP configuration.
Set the unit's static IP address.
Show the current IP address.
Set the unit's netmask address.
Show the current netmask.
Set the unit's gateway address.
Show the current gateway address.
DESCRIPTION
Set the name for input N1.
Show the name of input N1.
Set the name for output N1.
Show the name of output N1.
RS-232 & Telnet Commands
VARIABLES
Available values for N1:
ON
STANDBY
N1 = ON, OFF
VARIABLES
Available values for N1:
STATIC
DHCP
N1 = X.X.X.X
N1 = X.X.X.X
N1 = X.X.X.X
VARIABLES
N1 = 1~4
N2 = {name}
N1 = 1~4
N1 = A~B
N2 = {name} [24 characters max]
N1 = A~B
8
[Power on]
[Standby mode]
[Front panel lock state]
[Static IP mode]
[DHCP mode]
[X = 0~255, IP address]
[X = 0~255, Netmask]
[X = 0~255, Gateway]
[Input number]
[24 characters max]
[Input number]
[Output letter]
[Output letter]