Channel Setting - Sharp 25N S100 Operation Manual

Set Up (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1
Press MENU to access MAIN MENU screen.
2
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to
"SET UP".
3
Press VOL (+) or (–) to access SET UP mode.
4
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to
"CH SETTING".
5
Press VOL (+) or (–) to access CH SETTING mode.
6
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to the
" A I R / C A B L E " , t h e n p r e s s VO L ( + ) o r ( – ) t o a c c e s s
AIR/CABLE mode.
7
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to the
desired mode.
8
Press MENU to exit.
NOTE:
• Receivable channels of your TV set are:
AIR channels: VHF: 2 through 13.
UHF: 14 through 69.
26-31 25&27NS100/180 1.4
CABLE channels: 1 (HRC and IRC mode only)
27
(MAIN MENU screen)
(SET UP mode)
(CH SETTING mode)
(CH SETTING mode)
(AIR/CABLE mode)
2 through 125 (STD, HRC and IRC)
6/1/00, 2:11 PM
27