Blue Screen - Sharp 25N S100 Operation Manual

Set Up (Continued)
2.1
Press VOL (+) or (–) to access CH
MEMORY.
2.2
Use CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD to select each desired channel
to add or erase.
2.3
Press VOL (+) to add a channel to the TV's
memory or press VOL (–) to erase a
channel from the TV's memory.
2.4
Press MENU to exit.
To add channel 12 to the
To erase channel 12 from
(CH MEMORY
unmemorized channel)
NOTE:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1
Press MENU to access MAIN MENU screen.
2
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to
"SET UP".
3
Press VOL (+) or (–) to access SET UP mode.
4
Press VOL (+) or (–) to access BLUE SCREEN select mode.
5
Press VOL (+) or (–) to select "ON".
26-31 25&27NS100/180 1.4
VOL (+)
TV memory
VOL (–)
the TV memory
(CH MEMORY
memorized channel)
29
or
(MAIN MENU screen)
(SET UP mode)
(BLUE SCREEN select mode)
6/1/00, 2:11 PM
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
29