Channel Setting - Sharp CX51HF3 Operation Manual

TV/VIDEO
1 2 3
4 5 6
7 8 9
0
CH
CH
CH
CH
FEATURE TIMER PICTURE
CH-SET NORMAL
CH-SET
TV
• Switching COLOUR system:
Set the system to "AUTO" for normal TV reception. The AUTO mode automatically detects the receiving
signal system and changes the reception system of the TV set. When the picture is not stable, switching to
an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by fine tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure.
See .
14

Channel setting

Enables individual channel setting.
1
Press
CH-SET
CH-SETTING screen.
2
Press
CH
select desired setting.
3
Each time you press
, setting for individual
items changes as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR
AUTO PAL
• SKIP
ON OFF
Channel numbers with a " " mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set "SKIP" to "OFF".
• FINE
The frequency changes to allow fine tuning.
4
Press
CH-SET
normal screen.
• When you select AV1 or AV2 for the
channel position, the CH-SETTING
screen changes as shown on the
right and the colour mode changes
in the following order:
AUTO PAL
CH-SETTING
to call
POSITION
COLOUR
SKIP
FINE
/ to
CH
CH
/
CH-SETTING
to return to
POSITION
COLOUR
CH
N443 N358
CH27
AUTO
OFF
168.25MHz
:SELECT
:ADJUST
AV1
AUTO
:SELECT
:ADJUST
E 16