Energy Save - Sharp 25N S100 Operation Manual

Parent Control (VIEW TIMER Continued)
2
Press and hold both VOL (+) and CH DOWN ( 9 ) on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or can change the
SECRET No. while "INPUT SECRET No." is displayed.
L Notice of Remaining VIEWING TIME
• For every 30 minute interval, the "remaining time" will be displayed
for four seconds. For the last five minutes, the "remaining time"
will be displayed every minute.
• "0 REMAIN" will be displayed for 10 seconds just before the
VIEWING TIME is completed.

Energy Save

L This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off. The
reduction in brightness will be less noticeable under low room
lighting conditions.
1
Press MENU to access MAIN MENU screen.
2
Press CH UP ( 8 ) or DOWN ( 9 ) to move the " " mark to "ENERGY
SAVE".
3
Press VOL (+) or (–) to access ENERGY SAVE select mode.
4
Press VOL (+) or (–) to select "ON".
5
Press MENU to exit.
19-25 25&27NS100/180 1.4 25
(On the set)
VOL CH
-
+
9
VOL(+) / CH DOWN( 9 )
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
(ENERGY SAVE select mode)
6/1/00, 2:09 PM
8
25