Channel Setting - Sharp 27SF560 Operation Manual

7
Once EZ SETUP is complete, the lowest channel number [
2}
memorized will be displayed.
I I
m Channel Setting
if EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel
1 Press MENU to access the MAIN MENU screen.
2 Press CH A/T to move the "0" mark to "SET UP".
MENU
-->
MENU
_SLEEP TIMER
_;;_VIDEO ADJUST
_AUDIO SELECT
_DIGITAL AUDIO
_CLOSED CAPTION
_PARENT CONTROL
_ENERGY SAME
@_SET UP
(MAIN MENU screen)
3
Press VOL +/- to access the SET UP screen.
4 Press OH ,_/T to move the "O" mark to "CH SETTING".
ii_ U¸¸_¸
_SET UP
BLUE SCREEN
PERSONAL PREP
UNIVERSAL PLUS
LANGUAGE
®CH SETTING
AUTO INPUT
OH/INPUT ID
SCREEN FORMAT
(SET UP screen)
5 Press VOL +/- to access the CH SETTING screen.
Note: _-
,, If the viewing channel is an analog channel, Antenna
Setup Digital cannot be selected.
,, During Cable mode, Digital Channel Search and
Antenna Setup Digital cannot be selected.
CH SETTING I
@EZ SETUP
AIDANALOG CABLE
ANALOG OH SEARCH
DIGITAL CH SEARCH
CN MEMORY
ANTENNA SETUP DIGITAL
(CH SETTING screen)
6
Press CH A/_' to move the "_" mark to "AIR/ANALOG CABLE",
then press VOL +/- to access the AIR/CABLE screen.
OH SETTING
EZ SETUP
@AIR/ANALOG CABLE
ANALOG OH SEARCN
DIGITAL CH SEARCH
CN MEMORY
ANTENNA SETUP DIGITAL
7
Press CH A/T to move the "_" mark to the desired mode.
AIR/ANALOG CABLE
AIR
ICABLE STB
@CABLE HRC
ICABLE IRC
8 Press MENU to exit. ME.U
(AIR/CABLE screen)
i Note:
,, Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
34