Using Your Beer And Beverage Cooler; Display; Standby Mode; Light Key - Insignia NS-BC48SS7 User Manual

Using your beer and beverage cooler

Standby key Light key

Display

When you plug in your beer and beverage cooler for the first time, the
display screen turns on for three seconds, then the start-up tone rings.

Standby mode

To enter standby mode, press the Standby key continuously for three
seconds. The buzzer sounds and the display turns off.
To return to normal mode, press the Standby key.

Light key

Press the Light key to turn on or turn off the light. The buzzer sounds
when the light is turned on or off.

Setting the temperature

Press the Temperature up (
decrease the temperature by one degree.
The temperature range is 34~50°F (1~10°C).
Switching the temperature setting between Fahrenheit and
Celsius
Press and hold the Temperature up (
same time for three seconds to switch between Fahrenheit and Celsius.

Memory function

When the cooler is turned off, it remembers the current set temperature
and returns to that setting when it's turned back on.
8
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
Display
°
Caution
• The control keys should be pressed gently.
• Avoid scratching the control panel with sharp objects.
• Keep magnets away from the control panel. Otherwise the
cooler will not set and operate normally.
) or down (
www.insigniaproducts.com
Temperature Temperature
up key down key
°F/°C
) buttons, to increase or
) and down ( ) buttons at the