Connecting Dvpen01-Sl To The Network; Control Register (Cr); Control Registers In Dvpen01-Sl - Delta DVPEN01-SL Operation Manual

Ethernet communication module
Hide thumbs Also See for DVPEN01-SL:
Table of Contents

Advertisement

Ethernet Communication Module DVPEN01-SL

3.2 Connecting DVPEN01-SL to the Network:

Connect DVPEN01-SL to the Ethernet Hub by twisted pair cable CAT-5e. DVPEN01-SL has Auto MDI/MDIX function;
therefore, DVPEN01-SL does not need to use a crossing cable between the PC and DVPEN01-SL.
Network connections between the PC and DVPEN01-SL:
4

Control Register (CR)

4.1 Control Registers in DVPEN01-SL

CR#
Attribute
HW
LW
#0
R
Model code
#1
R
Firmware version
#2
R
Communication mode
#3
W
E-mail event 1 trigger
#4
W
E-mail event 2 trigger
#5
W
E-mail event 3 trigger
#6
W
E-mail event 4 trigger
#7
R
Status of E-mail 1, 2
#8
R
Status of E-mail 3, 4
E-mail 1 additional
#9
R/W
message
E-mail 2 additional
#10
R/W
message
E-mail 3 additional
#11
R/W
message
E-mail 4 additional
#12
R/W
message
#13
R/W
Data exchange trigger
#14
R
Status of data exchange Displaying current status of data exchange.
Enabling flag for the
#15
RW
RTU mapping
Connection status of the
#16
RW
RTU mapping slave
6
PC Master
DVPEN01
DVP28SV
DVPEN01
DVP28SV
POWER
RS-232
100M
LINK
RS-232
LAN
Content
The model code of DVPEN01-SL is set by its system, and can only
be read. Model code of DVPEN01-SL=H'6151.
Displaying the current firmware version in hex.
b0: MODBUS TCP mode; b1: data exchange mode
Setting whether to send E-mail 1
Setting whether to send E-mail 2
Setting whether to send E-mail 3
Setting whether to send E-mail 4
b0~b7: Current status of E-mail 2
b8~b15: Current status of E-mail 1
b0~b7: Current status of E-mail 4
b8~b15: Current status of E-mail 3
Filled in by the user, and it will be send by E-mail.
Filled in by the user, and it will be send by E-mail.
Filled in by the user, and it will be send by E-mail.
Filled in by the user, and it will be send by E-mail.
Setting whether to send out data in data exchange mode
1: Enable
0: Disable
Default=0
b0: Status of RTU slave 1
b1: Status of RTU slave 2
b2: Status of RTU slave 3
b3: Status of RTU slave 4
Ethernet
DVPEN01
DVP28SV
DVP28SV
DVPEN01
POWER
RS-232
100M
LINK
RS-232
LAN
Explanation
DVP-PLC Operation Manual

Advertisement

Table of Contents
loading

Table of Contents